SAFETY DATA SHEETS

According to the UN GHS revision 10

Version: 1.0

Creation Date: July 15, 2019

Revision Date: July 15, 2019

SECTION 1: Identification

1.1GHS Product identifier

Product name	1-methyl-2-pyrrolidone

1.2Other means of identification

Product number	-
Other names	N-methyl-pyrrolidin-2-one; 2-Pyrrolidinone, 1-methyl-; n-methyl-2-pyrrolidinone

1.3Recommended use of the chemical and restrictions on use

Identified uses	Industrial and scientific research use.
Uses advised against	no data available

SECTION 2: Hazard identification

2.1Classification of the substance or mixture

Skin irritation, Category 2

Eye irritation, Category 2

Specific target organ toxicity – single exposure, Category 3

Reproductive toxicity, Category 1B

2.2GHS label elements, including precautionary statements

Pictogram(s)
Signal word	Danger
Hazard statement(s)	H315 Causes skin irritation H319 Causes serious eye irritation H335 May cause respiratory irritation
Precautionary statement(s)
Prevention	P264 Wash ... thoroughly after handling. P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/... P261 Avoid breathing dust/fume/gas/mist/vapours/spray. P271 Use only outdoors or in a well-ventilated area. P203 Obtain, read and follow all safety instructions before use.
Response	P302+P352 IF ON SKIN: Wash with plenty of water/... P321 Specific treatment (see ... on this label). P332+P317 If skin irritation occurs: Get medical help. P362+P364 Take off contaminated clothing and wash it before reuse. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P319 Get medical help if you feel unwell. P318 IF exposed or concerned, get medical advice.
Storage	P403+P233 Store in a well-ventilated place. Keep container tightly closed. P405 Store locked up.
Disposal	P501 Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal.

2.3Other hazards which do not result in classification

no data available

SECTION 3: Composition/information on ingredients

3.1Substances

Chemical name	Common names and synonyms	CAS number	EC number	Concentration
1-methyl-2-pyrrolidone	1-methyl-2-pyrrolidone	872-50-4	212-828-1	100%

SECTION 4: First-aid measures

4.1Description of necessary first-aid measures

If inhaled

Fresh air, rest. Refer for medical attention.

Following skin contact

Rinse skin with plenty of water or shower.

Following eye contact

First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then refer for medical attention.

Following ingestion

Rinse mouth. Refer for medical attention .

4.2Most important symptoms/effects, acute and delayed

Inhalation of hot vapors can irritate nose and throat. Ingestion causes irritation of mouth and stomach. Contact with eyes causes irritation. Repeated and prolonged skin contact produces a mild, transient irritation. (USCG, 1999)

4.3Indication of immediate medical attention and special treatment needed, if necessary

Immediate first aid: Ensure that adequate decontamination has been carried out. If patient is not breathing, start artificial respiration, preferably with a demand valve resuscitator, bag-valve-mask device, or pocket mask, as trained. Perform CPR if necessary. Immediately flush contaminated eyes with gently flowing water. Do not induce vomiting. If vomiting occurs, lean patient forward or place on the left side (head-down position, if possible) to maintain an open airway and prevent aspiration. Keep patient quiet and maintain normal body temperature. Obtain medical attention. Poisons A and B

SECTION 5: Fire-fighting measures

5.1Suitable extinguishing media

Use water spray, powder, alcohol-resistant foam, carbon dioxide.

5.2Specific hazards arising from the chemical

Special Hazards of Combustion Products: Toxic oxides of nitrogen may be formed in fire. (USCG, 1999)

5.3Special protective actions for fire-fighters

Use water spray, powder, alcohol-resistant foam, carbon dioxide.

SECTION 6: Accidental release measures

6.1Personal precautions, protective equipment and emergency procedures

Personal protection: filter respirator for organic gases and vapours adapted to the airborne concentration of the substance. Collect leaking liquid in sealable containers. Absorb liquid in sand or inert absorbent. Store and dispose of according to local regulations. Wash away remainder with plenty of water.

6.2Environmental precautions

Personal protection: filter respirator for organic gases and vapours adapted to the airborne concentration of the substance. Collect leaking liquid in sealable containers. Absorb liquid in sand or inert absorbent. Store and dispose of according to local regulations. Wash away remainder with plenty of water.

6.3Methods and materials for containment and cleaning up

Spillage Disposal: Personal protection: filter respirator for organic gases and vapours adapted to the airborne concentration of the substance. Collect leaking and spilled liquid in sealable containers as far as possible. Absorb remaining liquid in sand or inert absorbent. Then store and dispose of according to local regulations.

SECTION 7: Handling and storage

7.1Precautions for safe handling

NO open flames. Above 86°C use a closed system and ventilation. Handling in a well ventilated place. Wear suitable protective clothing. Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Use non-sparking tools. Prevent fire caused by electrostatic discharge steam.

7.2Conditions for safe storage, including any incompatibilities

Dry. Ventilation along the floor. Separated from strong oxidants, strong acids, strong bases, copper and plastics.Small quantities can be stored in polyethylene, polypropylene, or clear glass bottles.

SECTION 8: Exposure controls/personal protection

8.1Control parameters

Occupational Exposure limit values

EU-OEL: 40 mg/m3, 10 ppm as TWA; 80 mg/m3, 20 ppm as STEL; (skin).MAK: 82 mg/m3, 20 ppm; peak limitation category: II(2); skin absorption (H); pregnancy risk group: C

Biological limit values

no data available

8.2Appropriate engineering controls

Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice. Set up emergency exits and the risk-elimination area.

8.3Individual protection measures, such as personal protective equipment (PPE)

Eye/face protection

Wear safety goggles.

Skin protection

Protective gloves. Protective clothing.

Respiratory protection

Use local exhaust or ventilation.

Thermal hazards

no data available

SECTION 9: Physical and chemical properties and safety characteristics

Physical state	Liquid.
Colour	Clear, colorless.
Odour	Mild amine odor
Melting point/freezing point	-24.2 °C. Atm. press.:1 013 hPa. Remarks:Accuracy: ± 0.1 °C.
Boiling point or initial boiling point and boiling range	204.3 °C. Atm. press.:1 015.8 hPa.
Flammability	Combustible. Gives off irritating or toxic fumes (or gases) in a fire.
Lower and upper explosion limit/flammability limit	no data available
Flash point	91 °C. Atm. press.:1 013 hPa.
Auto-ignition temperature	245 °C. Atm. press.:1 013 hPa.
Decomposition temperature	no data available
pH	pH = 7.7-8
Kinematic viscosity	dynamic viscosity (in mPa s) = 1.661. Temperature:25.0°C.
Solubility	greater than or equal to 100 mg/mL at 68° F (NTP, 1992)
Partition coefficient n-octanol/water	log Pow = -0.46. Temperature:25 °C.
Vapour pressure	0.32 hPa. Temperature:20 °C. Remarks:Extrapolated value from vapour pressure curve using the antoine equation.;0.46 hPa. Temperature:25 °C. Remarks:Extrapolated value from vapour pressure curve using the antoine equation.;2.54 hPa. Temperature:50 °C. Remarks:Extrapolated value from vapour pressure curve using the antoine equation.
Density and/or relative density	1.03 g/cm³. Temperature:25 °C.
Relative vapour density	3.4 (vs air)
Particle characteristics	no data available

SECTION 10: Stability and reactivity

10.1Reactivity

Decomposes on heating and on burning. This produces toxic fumes including nitrogen oxides. It reacts violently with strong acids and strong bases. Attacks copper and its alloys.

10.2Chemical stability

NMP shows unlimited shelf life in tightly closed containers, slight discoloration does not impair its quality.

10.3Possibility of hazardous reactions

Combustible when exposed to heat, open flame, or powerful oxidizers.This amine is a very mild chemical base. It does tend to neutralize acids to form salts plus water. The amount of heat that is evolved per mole of amine in a neutralization is largely independent of the strength of the amine as a base. Amines may be incompatible with isocyanates, halogenated organics, peroxides, phenols (acidic), epoxides, anhydrides, and acid halides. Flammable gaseous hydrogen is generated by amines in combination with strong reducing agents, such as hydrides.

10.4Conditions to avoid

no data available

10.5Incompatible materials

Reacts with sulfur or carbon disulfide at high temperatures and pressures.

10.6Hazardous decomposition products

Decomposes on heating and on burning. This produces toxic fumes including nitrogen oxides and carbon monoxide.

SECTION 11: Toxicological information

Acute toxicity

• Oral: LD50 - rat (male/female) - 4 150 mg/kg bw.
• Inhalation: LC50 - rat (male/female) - > 5.1 mg/L air.
• Dermal: LD50 - rat (male/female) - > 5 000 mg/kg bw.

Skin corrosion/irritation

no data available

Serious eye damage/irritation

no data available

Respiratory or skin sensitization

no data available

Germ cell mutagenicity

no data available

Carcinogenicity

no data available

Reproductive toxicity

no data available

STOT-single exposure

The substance is irritating to the eyes and respiratory tract. The substance is mildly irritating to the skin. Exposure to very high concentrations could cause lowering of consciousness.

STOT-repeated exposure

Repeated or prolonged contact with skin may cause dermatitis. Animal tests show that this substance possibly causes toxic effects upon human reproduction.

Aspiration hazard

A harmful contamination of the air will not or will only very slowly be reached on evaporation of this substance at 20°C; on spraying or dispersing, however, much faster.

SECTION 12: Ecological information

12.1Toxicity

• Toxicity to fish: LC50 - Oncorhynchus mykiss (previous name: Salmo gairdneri) - > 500 mg/L - 96 h.
• Toxicity to daphnia and other aquatic invertebrates: EC0 - Daphnia magna - > 1 000 mg/L - 24 h.
• Toxicity to algae: EC50 - Desmodesmus subspicatus (previous name: Scenedesmus subspicatus) - 600.5 mg/L - 72 h.
• Toxicity to microorganisms: EC50 - activated sludge, industrial - > 600 mg/L - 30 min. Remarks:Respiration rate.

12.2Persistence and degradability

AEROBIC: In a static die-away system using a sewage sludge seed and a semi-continuous activated sludge system, 1-methyl-2-pyrrolidinone displayed 95% removal after 2 weeks and an average 7 day biodegradability of 95%, respectively(1). 1-Methyl-2-pyrrolidinone at an initial concentration of 210 ppm underwent >98% removal after 24 hrs when inoculated with a sewage sludge seed(2). 1-Methyl-2-pyrrolidinone at an initial concentration of 150 mg/L underwent 94% removal as measured by COD after a 1 day lag period in a screening study using an activated sludge seed(3). In a model flow-through biological treatment apparatus with an 18-hour retention time, 1-methyl-2-pyrrolidinone at an initial concentration of 300 mg/L underwent >98% removal using an activated sewage sludge(4). In a static screening test, 1-methyl-2-pyrrolidinone underwent >90% removal after a 3-5 day acclimation period using a sewage sludge seed(5). 1-Methyl-2-pyrrolidinone, present at 100 mg/L, reached 73% of its theoretical BOD in 4 weeks using an activated sludge inoculum at 30 mg/L in the Japanese MITI test(6).

12.3Bioaccumulative potential

An estimated BCF of 3 was calculated in fish for 1-methyl-2-pyrrolidone(SRC), using a log Kow of -0.38(1). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is low(SRC).

12.4Mobility in soil

The Koc of 1-methyl-2-pyrrolidone is estimated as 5(SRC), using a log Kow of -0.38(1) and a regression-derived equation(2). According to a classification scheme(3), this estimated Koc value suggests that 1-methyl-2-pyrrolidone is expected to have very high mobility in soil. 1-Methyl-2-pyrrolidinone had Rf values of 0.74, 0.65, 0.67, and 1.0 in silt, loam, clay and sand, respectively, in laboratory soil thin layer chromatography (TLC) experiments(4) which is consistent with significant mobility in soil(SRC).

12.5Other adverse effects

no data available

SECTION 13: Disposal considerations

13.1Disposal methods

Product

The material can be disposed of by removal to a licensed chemical destruction plant or by controlled incineration with flue gas scrubbing. Do not contaminate water, foodstuffs, feed or seed by storage or disposal. Do not discharge to sewer systems.

Contaminated packaging

Containers can be triply rinsed (or equivalent) and offered for recycling or reconditioning. Alternatively, the packaging can be punctured to make it unusable for other purposes and then be disposed of in a sanitary landfill. Controlled incineration with flue gas scrubbing is possible for combustible packaging materials.

SECTION 14: Transport information

14.1UN Number

ADR/RID: Not dangerous goods. (For reference only, please check.)

IMDG: Not dangerous goods. (For reference only, please check.)

IATA: Not dangerous goods. (For reference only, please check.)

14.2UN Proper Shipping Name

ADR/RID: Not dangerous goods. (For reference only, please check.)

IMDG: Not dangerous goods. (For reference only, please check.)

IATA: Not dangerous goods. (For reference only, please check.)

14.3Transport hazard class(es)

ADR/RID: Not dangerous goods. (For reference only, please check.)

IMDG: Not dangerous goods. (For reference only, please check.)

IATA: Not dangerous goods. (For reference only, please check.)

14.4Packing group, if applicable

ADR/RID: Not dangerous goods. (For reference only, please check.)

IMDG: Not dangerous goods. (For reference only, please check.)

IATA: Not dangerous goods. (For reference only, please check.)

14.5Environmental hazards

ADR/RID: No

IMDG: No

IATA: No

14.6Special precautions for user

no data available

14.7Transport in bulk according to IMO instruments

no data available

SECTION 15: Regulatory information

15.1Safety, health and environmental regulations specific for the product in question

Chemical name	Common names and synonyms	CAS number	EC number
1-methyl-2-pyrrolidone	1-methyl-2-pyrrolidone	872-50-4	212-828-1
European Inventory of Existing Commercial Chemical Substances (EINECS)			Listed.
EC Inventory			Listed.
United States Toxic Substances Control Act (TSCA) Inventory			Listed.
China Catalog of Hazardous chemicals 2015			Not Listed.
New Zealand Inventory of Chemicals (NZIoC)			Listed.
Philippines Inventory of Chemicals and Chemical Substances (PICCS)			Listed.
Vietnam National Chemical Inventory			Listed.
Chinese Chemical Inventory of Existing Chemical Substances (China IECSC)			Listed.
Korea Existing Chemicals List (KECL)			Listed.

SECTION 16: Other information

Information on revision

Creation Date	July 15, 2019
Revision Date	July 15, 2019

Package&Shipping

Qingdao Bravery International Trading Co., LTD. is located in the beautiful tourist city of Qingdao, is a comprehensive chemical enterprise which doing import and export business. Product range including, API, pharmacy intermediates,food additive,Surfactant ,fungicides and other general chemicals. etc.

With the developing world market, we adhere to the principle of "quality, service, integrity and development" ,Forge ahead,and constantly in pursuit of higher level of product quality and service.

We warmly welcome customers home and abroad to build mutual trust, mutual benefit and stable cooperation relation.

 

General items: import and export of goods; Technology import and export; Food additive sales; Feed additive sales; Sales of special chemical products (without hazardous chemicals); Sales of chemical products (excluding licensed chemical products); Livestock and fishery feed sales; Feed raw material sales; Fertilizer sales; Sales of bio-based materials; Health food (pre-packaged) sales; Food sales (pre-packaged food only); Sales of agricultural and sideline products; Pharmaceutical excipients sales; Drug wholesale

 

 

We could give you:

1.Best quality in your requirement

2.Competitive price in China market with standard high quality or customize

3.mature Technical support，Well-trained and professional technologist and sales with rich experience in the field for 5-10 years

4.Professional logistic support，Free sample and correct shipping documents dispatched according to regulations of different countries

All we want is win-win business. Send your inquiries, you will get it!

 

Why choose us:

1.Factory direct sales, so we can provide the competitive price and high quality product base on 5 years of production and R&D experience

2.It is available in stock for quick shipment. Products could be packaged according to customer’s specialized requirements.

3.The products can be transported by Courier, air or sea.

4.Customers will receive the most professional technical support and efficient service.

5.Any inquiries will be replied within 24hours.

6.High purity with test report.