TRIETHYLENE GLYCOL MONOBUTYL ETHER (TEB) CAS NO.143-22-6

SAFETY DATA SHEETS

According to the UN GHS revision 10

Version: 1.0

Creation Date: July 15, 2019

Revision Date: July 15, 2019

SECTION 1: Identification

1.1GHS Product identifier

Product name	2-(2-(2-butoxyethoxy)ethoxy)ethanol

1.2Other means of identification

Product number	-
Other names	Triethylene glycol monobutyl ether; 2-[2-(2-butoxyethoxy)ethoxy]ethanol; Ethanol, 2-[2-(2-butoxyethoxy)ethoxy]-

1.3Recommended use of the chemical and restrictions on use

Identified uses	Industrial and scientific research use.
Uses advised against	no data available

SECTION 2: Hazard identification

2.1Classification of the substance or mixture

Serious eye damage, Category 1

2.2GHS label elements, including precautionary statements

Pictogram(s)
Signal word	Danger
Hazard statement(s)	H318 Causes serious eye damage
Precautionary statement(s)
Prevention	P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
Response	P305+P354+P338 IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P317 Get medical help.
Storage	none
Disposal	none

2.3Other hazards which do not result in classification

no data available

SECTION 3: Composition/information on ingredients

3.1Substances

Chemical name	Common names and synonyms	CAS number	EC number	Concentration
2-(2-(2-butoxyethoxy)ethoxy)ethanol	2-(2-(2-butoxyethoxy)ethoxy)ethanol	143-22-6	205-592-6	100%

SECTION 4: First-aid measures

4.1Description of necessary first-aid measures

If inhaled

Fresh air, rest.

Following skin contact

Rinse skin with plenty of water or shower.

Following eye contact

First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then refer for medical attention.

Following ingestion

Rinse mouth.

4.2Most important symptoms/effects, acute and delayed

no data available

4.3Indication of immediate medical attention and special treatment needed, if necessary

Absorption, Distribution and Excretion

Human abdominal whole skin (2.54 cm sq) was mounted in a glass diffusion apparatus (at 30 +/- 1 degree C) and the diffusion of triethylene glycol monobutyl ether was monitored during a 12-hr period using gas chromatography (n=6). The integrity of the epidermal membranes was first assessed by measuring permeability of membranes to tritiated water. Epidermal membranes displaying permeability constants greater than 1.5 x 10E-3 cm/hr were deemed to have been damaged during preparation and were rejected. The mean steady state of absorption for triethylene glycol monobutyl ether was 22.2 ug/cm sq/hr (SD +/- 8.59), which was 100-fold less than that of ethylene glycol monomethyl ether. Test material did not increase permeability of the membrane (damage ratio of 1.26).

SECTION 5: Fire-fighting measures

5.1Suitable extinguishing media

Use water spray, powder, alcohol-resistant foam, carbon dioxide.

5.2Specific hazards arising from the chemical

Combustible.

5.3Special protective actions for fire-fighters

Use water spray, powder, alcohol-resistant foam, carbon dioxide.

SECTION 6: Accidental release measures

6.1Personal precautions, protective equipment and emergency procedures

Personal protection: filter respirator for organic gases and vapours adapted to the airborne concentration of the substance. Ventilation. Collect leaking and spilled liquid in sealable containers as far as possible. Wash away remainder with plenty of water.

6.2Environmental precautions

Personal protection: filter respirator for organic gases and vapours adapted to the airborne concentration of the substance. Ventilation. Collect leaking and spilled liquid in sealable containers as far as possible. Wash away remainder with plenty of water.

6.3Methods and materials for containment and cleaning up

Collect and arrange disposal. Keep the chemical in suitable and closed containers for disposal. Remove all sources of ignition. Use spark-proof tools and explosion-proof equipment. Adhered or collected material should be promptly disposed of, in accordance with appropriate laws and regulations.

SECTION 7: Handling and storage

7.1Precautions for safe handling

NO open flames. Handling in a well ventilated place. Wear suitable protective clothing. Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Use non-sparking tools. Prevent fire caused by electrostatic discharge steam.

7.2Conditions for safe storage, including any incompatibilities

Store the container tightly closed in a dry, cool and well-ventilated place. Store apart from foodstuff containers or incompatible materials.

SECTION 8: Exposure controls/personal protection

8.1Control parameters

Occupational Exposure limit values

no data available

Biological limit values

no data available

8.2Appropriate engineering controls

Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice. Set up emergency exits and the risk-elimination area.

8.3Individual protection measures, such as personal protective equipment (PPE)

Eye/face protection

Wear safety goggles.

Skin protection

Protective gloves.

Respiratory protection

Use ventilation.

Thermal hazards

no data available

SECTION 9: Physical and chemical properties and safety characteristics

Physical state	Liquid.
Colour	Colourless.
Odour	Mild smelling
Melting point/freezing point	-35.2 °C. Atm. press.:1 atm.
Boiling point or initial boiling point and boiling range	278 °C. Atm. press.:1 atm.
Flammability	Combustible.
Lower and upper explosion limit/flammability limit	no data available
Flash point	131 °C. Atm. press.:1 013.25 hPa.
Auto-ignition temperature	202 °C. Atm. press.:1 013.25 hPa.
Decomposition temperature	no data available
pH	7. Remarks:7; neutral.
Kinematic viscosity	kinematic viscosity (in mm²/s) = 9.2. Temperature:25.0°C. Remarks:Equivalent to a dynamic viscosity of 9.1 mPas.
Solubility	Very soluble in ethanol, methanol
Partition coefficient n-octanol/water	log Pow = 0.51. Temperature:25 °C.
Vapour pressure	0.003 mm Hg. Temperature:25 °C. Remarks:Experimentally derived value.;0.001 mm Hg. Temperature:25 °C. Remarks:Value from a QSAR.
Density and/or relative density	Ca. 989 kg/m³. Temperature:20 °C.
Relative vapour density	no data available
Particle characteristics	no data available

SECTION 10: Stability and reactivity

10.1Reactivity

no data available

10.2Chemical stability

no data available

10.3Possibility of hazardous reactions

Combustible

10.4Conditions to avoid

no data available

10.5Incompatible materials

Glycol ethers, glycols, ketones, and alcohols undergo violent decomposition in contact with 68-72% perchloric acid

10.6Hazardous decomposition products

When heated to decomposition it emits acrid smoke and irritating fumes.

SECTION 11: Toxicological information

Acute toxicity

• Oral: LD50 - rat (male/female) - 5 170 mg/kg bw.
• Inhalation: LCLo - rat (male/female) - 1 200 mg/m³ air.
• Dermal: LD50 - rabbit (male) - 3 540 mg/kg bw.

Skin corrosion/irritation

no data available

Serious eye damage/irritation

no data available

Respiratory or skin sensitization

no data available

Germ cell mutagenicity

no data available

Carcinogenicity

no data available

Reproductive toxicity

no data available

STOT-single exposure

The substance is irritating to the eyes. The substance is mildly irritating to the skin.

STOT-repeated exposure

The substance defats the skin, which may cause dryness or cracking.

Aspiration hazard

A harmful contamination of the air will not or will only very slowly be reached on evaporation of this substance at 20°C.

SECTION 12: Ecological information

12.1Toxicity

• Toxicity to fish: LC50 - Leuciscus idus - 2 200 - 4 600 mg/L - 96 h.
• Toxicity to daphnia and other aquatic invertebrates: LC50 - Daphnia magna - 2 210 mg/L - 48 h.
• Toxicity to algae: EC10 - Desmodesmus subspicatus (previous name: Scenedesmus subspicatus) - 612.6 mg/L - 72 h.
• Toxicity to microorganisms: Toxicity threshold (TT) or EC3 or (~NOEC) - Pseudomonas putida - 1 221 mg/L - 16 h.

12.2Persistence and degradability

AEROBIC: The theoretical BODs for triethylene glycol monobutyl ether are 0, 5, and 24% for 5 days, 10 days, and 20 days, respectively, indicating that it will be partially removed from biological wastewater treatment plants(1).

12.3Bioaccumulative potential

An estimated BCF of 3 was calculated in fish for triethylene glycol monobutyl ether(SRC), using an estimated log Kow of 0.02(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is low(SRC).

12.4Mobility in soil

Using a structure estimation method based on molecular connectivity indices(1), the Koc of triethylene glycol monobutyl ether can be estimated to be 10(SRC). According to a classification scheme(2), this estimated Koc value suggests that triethylene glycol monobutyl ether is expected to have very high mobility in soil(SRC).

12.5Other adverse effects

no data available

SECTION 13: Disposal considerations

13.1Disposal methods

Product

The material can be disposed of by removal to a licensed chemical destruction plant or by controlled incineration with flue gas scrubbing. Do not contaminate water, foodstuffs, feed or seed by storage or disposal. Do not discharge to sewer systems.

Contaminated packaging

Containers can be triply rinsed (or equivalent) and offered for recycling or reconditioning. Alternatively, the packaging can be punctured to make it unusable for other purposes and then be disposed of in a sanitary landfill. Controlled incineration with flue gas scrubbing is possible for combustible packaging materials.

SECTION 14: Transport information

14.1UN Number

ADR/RID: Not dangerous goods. (For reference only, please check.)

IMDG: Not dangerous goods. (For reference only, please check.)

IATA: Not dangerous goods. (For reference only, please check.)

14.2UN Proper Shipping Name

ADR/RID: Not dangerous goods. (For reference only, please check.)

IMDG: Not dangerous goods. (For reference only, please check.)

IATA: Not dangerous goods. (For reference only, please check.)

14.3Transport hazard class(es)

ADR/RID: Not dangerous goods. (For reference only, please check.)

IMDG: Not dangerous goods. (For reference only, please check.)

IATA: Not dangerous goods. (For reference only, please check.)

14.4Packing group, if applicable

ADR/RID: Not dangerous goods. (For reference only, please check.)

IMDG: Not dangerous goods. (For reference only, please check.)

IATA: Not dangerous goods. (For reference only, please check.)

14.5Environmental hazards

ADR/RID: No

IMDG: No

IATA: No

14.6Special precautions for user

no data available

14.7Transport in bulk according to IMO instruments

no data available

SECTION 15: Regulatory information

15.1Safety, health and environmental regulations specific for the product in question

Chemical name	Common names and synonyms	CAS number	EC number
2-(2-(2-butoxyethoxy)ethoxy)ethanol	2-(2-(2-butoxyethoxy)ethoxy)ethanol	143-22-6	205-592-6
European Inventory of Existing Commercial Chemical Substances (EINECS)			Listed.
EC Inventory			Listed.
United States Toxic Substances Control Act (TSCA) Inventory			Listed.
China Catalog of Hazardous chemicals 2015			Not Listed.
New Zealand Inventory of Chemicals (NZIoC)			Listed.
Philippines Inventory of Chemicals and Chemical Substances (PICCS)			Listed.
Vietnam National Chemical Inventory			Listed.
Chinese Chemical Inventory of Existing Chemical Substances (China IECSC)			Listed.
Korea Existing Chemicals List (KECL)			Listed.

SECTION 16: Other information

Information on revision

Creation Date	July 15, 2019
Revision Date	July 15, 2019

Abbreviations and acronyms

• CAS: Chemical Abstracts Service
• ADR: European Agreement concerning the International Carriage of Dangerous Goods by Road
• RID: Regulation concerning the International Carriage of Dangerous Goods by Rail
• IMDG: International Maritime Dangerous Goods
• IATA: International Air Transportation Association
• TWA: Time Weighted Average
• STEL: Short term exposure limit
• LC50: Lethal Concentration 50%
• LD50: Lethal Dose 50%
• EC50: Effective Concentration 50%

 

Package&Shipping

Qingdao Bravery International Trading Co., LTD. is located in the beautiful tourist city of Qingdao, is a comprehensive chemical enterprise which doing import and export business. Product range including, API, pharmacy intermediates,food additive,Surfactant ,fungicides and other general chemicals. etc.

With the developing world market, we adhere to the principle of "quality, service, integrity and development" ,Forge ahead,and constantly in pursuit of higher level of product quality and service.

We warmly welcome customers home and abroad to build mutual trust, mutual benefit and stable cooperation relation.

 

General items: import and export of goods; Technology import and export; Food additive sales; Feed additive sales; Sales of special chemical products (without hazardous chemicals); Sales of chemical products (excluding licensed chemical products); Livestock and fishery feed sales; Feed raw material sales; Fertilizer sales; Sales of bio-based materials; Health food (pre-packaged) sales; Food sales (pre-packaged food only); Sales of agricultural and sideline products; Pharmaceutical excipients sales; Drug wholesale

 

 

We could give you:

1.Best quality in your requirement

2.Competitive price in China market with standard high quality or customize

3.mature Technical support，Well-trained and professional technologist and sales with rich experience in the field for 5-10 years

4.Professional logistic support，Free sample and correct shipping documents dispatched according to regulations of different countries

All we want is win-win business. Send your inquiries, you will get it!

 

Why choose us:

1.Factory direct sales, so we can provide the competitive price and high quality product base on 5 years of production and R&D experience

2.It is available in stock for quick shipment. Products could be packaged according to customer’s specialized requirements.

3.The products can be transported by Courier, air or sea.

4.Customers will receive the most professional technical support and efficient service.

5.Any inquiries will be replied within 24hours.

6.High purity with test report.