Lower Price DIETHYLENE GLYCOL BUTYL ETHER (DEB) CAS NO.112-34-5

SAFETY DATA SHEETS

According to the UN GHS revision 10

Version: 1.0

Creation Date: July 15, 2019

Revision Date: July 15, 2019

SECTION 1: Identification

1.1GHS Product identifier

Product name	2-(2-butoxyethoxy)ethanol

1.2Other means of identification

Product number	-
Other names	2-(2-butoxyethoxy)ethanol; Ethanol, 2-(2-butoxyethoxy)-; 2-(2-Butoxyethoxy)ethanol

1.3Recommended use of the chemical and restrictions on use

Identified uses	Industrial and scientific research use.
Uses advised against	no data available

SECTION 2: Hazard identification

2.1Classification of the substance or mixture

Eye irritation, Category 2

2.2GHS label elements, including precautionary statements

Pictogram(s)
Signal word	Warning
Hazard statement(s)	H319 Causes serious eye irritation
Precautionary statement(s)
Prevention	P264 Wash ... thoroughly after handling. P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
Response	P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Storage	none
Disposal	none

2.3Other hazards which do not result in classification

no data available

SECTION 3: Composition/information on ingredients

3.1Substances

Chemical name	Common names and synonyms	CAS number	EC number	Concentration
2-(2-butoxyethoxy)ethanol	2-(2-butoxyethoxy)ethanol	112-34-5	203-961-6	100%

SECTION 4: First-aid measures

4.1Description of necessary first-aid measures

If inhaled

Fresh air, rest.

Following skin contact

Remove contaminated clothes. Rinse skin with plenty of water or shower.

Following eye contact

First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then refer for medical attention.

Following ingestion

Rinse mouth.

4.2Most important symptoms/effects, acute and delayed

Inhalation for brief periods has no significant effect. Contact with liquid causes moderate irritation of eyes and corneal injury. Prolonged contact with skin causes only minor irritation. (USCG, 1999)

4.3Indication of immediate medical attention and special treatment needed, if necessary

Immediate first aid: Ensure that adequate decontamination has been carried out. If patient is not breathing, start artificial respiration, preferably with a demand-valve resuscitator, bag-valve-mask device, or pocket mask, as trained. Perform CPR as necessary. Immediately flush contaminated eyes with gently flowing water. Do not induce vomiting. If vomiting occurs, lean patient forward or place on left side (head-down position, if possible) to maintain an open airway and prevent aspiration. Keep patient quiet and maintain normal body temperature. Obtain medical attention. Ethers and related compounds

SECTION 5: Fire-fighting measures

5.1Suitable extinguishing media

Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.

5.2Specific hazards arising from the chemical

This chemical is combustible. (NTP, 1992)

5.3Special protective actions for fire-fighters

Use water spray, powder, alcohol-resistant foam, carbon dioxide.

SECTION 6: Accidental release measures

6.1Personal precautions, protective equipment and emergency procedures

Collect leaking liquid in sealable containers. Wash away remainder with plenty of water.

6.2Environmental precautions

Collect leaking liquid in sealable containers. Wash away remainder with plenty of water.

6.3Methods and materials for containment and cleaning up

Use personal protective equipment. Avoid breathign vapors, mist, or gas. Ensure adequate ventilation.

SECTION 7: Handling and storage

7.1Precautions for safe handling

NO open flames. Above 78°C use a closed system and ventilation. Handling in a well ventilated place. Wear suitable protective clothing. Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Use non-sparking tools. Prevent fire caused by electrostatic discharge steam.

7.2Conditions for safe storage, including any incompatibilities

Separated from strong oxidants. Ventilation along the floor.Conditions for safe storage, including any incompatibilities: Store in cool place. Keep container tightly closed in a dry and well-ventilated place.

SECTION 8: Exposure controls/personal protection

8.1Control parameters

Occupational Exposure limit values

TLV: 10 ppm as TWA.MAK: 67 mg/m3, 10 ppm; peak limitation category: I(1); pregnancy risk group: C.EU-OEL: 67.5 mg/m3, 10 ppm as TWA; 101.2 mg/m3, 15 ppm as STEL

Biological limit values

no data available

8.2Appropriate engineering controls

Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice. Set up emergency exits and the risk-elimination area.

8.3Individual protection measures, such as personal protective equipment (PPE)

Eye/face protection

Wear safety spectacles.

Skin protection

Protective gloves.

Respiratory protection

Use ventilation. Use local exhaust.

Thermal hazards

no data available

SECTION 9: Physical and chemical properties and safety characteristics

Physical state	Liquid.
Colour	Colourless.
Odour	Faint butyl odor
Melting point/freezing point	< -70 °C. Atm. press.:1 atm.
Boiling point or initial boiling point and boiling range	231 °C. Atm. press.:1 atm.
Flammability	Combustible.
Lower and upper explosion limit/flammability limit	Lower flammable limit: 0.85% by volume; Upper flammable limit: 24.6% by volume
Flash point	93 °C. Atm. press.:1 atm.
Auto-ignition temperature	210 °C. Atm. press.:1 013.25 hPa.
Decomposition temperature	no data available
pH	Neutral
Kinematic viscosity	dynamic viscosity (in mPa s) = 6.49. Temperature:20°C.
Solubility	greater than or equal to 100 mg/mL at 68° F (NTP, 1992)
Partition coefficient n-octanol/water	log Pow = 1. Temperature:20 °C.
Vapour pressure	0.022 mm Hg. Temperature:25 °C.
Density and/or relative density	Ca. 955.3 kg/m³. Temperature:20 °C.
Relative vapour density	5.6 (vs air)
Particle characteristics	no data available

SECTION 10: Stability and reactivity

10.1Reactivity

The substance can presumably form explosive peroxides. Reacts with strong oxidants.

10.2Chemical stability

no data available

10.3Possibility of hazardous reactions

Combustible when exposed to heat or flame; can react with oxidizing materials.DIETHYLENE GLYCOL MONOBUTYL ETHER is a ether-alcohol derivative. The ether being relatively unreactive. Flammable and/or toxic gases are generated by the combination of alcohols with alkali metals, nitrides, and strong reducing agents. They react with oxoacids and carboxylic acids to form esters plus water. Oxidizing agents convert alcohols to aldehydes or ketones. Alcohols exhibit both weak acid and weak base behavior. They may initiate the polymerization of isocyanates and epoxides.

10.4Conditions to avoid

no data available

10.5Incompatible materials

Glycol ethers, glycols, ketones, and alcohols undergo violent decomposition in contact with 68-72% perchloric acid

10.6Hazardous decomposition products

When heated to decomposition it emits acrid smoke and irritating fumes.

SECTION 11: Toxicological information

Acute toxicity

• Oral: LD50 - mouse (male) - 2 410 mg/kg bw. Remarks:Results for fasted animals.
• Inhalation: inhalation risk test - rat - > 29 ppm.
• Dermal: LD50 - rabbit (male) - 2 764 mg/kg bw.

Skin corrosion/irritation

no data available

Serious eye damage/irritation

no data available

Respiratory or skin sensitization

no data available

Germ cell mutagenicity

no data available

Carcinogenicity

no data available

Reproductive toxicity

no data available

STOT-single exposure

The substance is irritating to the eyes.

STOT-repeated exposure

The substance defats the skin, which may cause dryness or cracking.

Aspiration hazard

A harmful contamination of the air will be reached slowly on evaporation of this substance at 20°C; on spraying or dispersing, however, much faster.

SECTION 12: Ecological information

12.1Toxicity

• Toxicity to fish: LC50 - Lepomis macrochirus - 1 300 mg/L - 96 h.
• Toxicity to daphnia and other aquatic invertebrates: EC50 - Daphnia magna - > 100 mg/L - 48 h.
• Toxicity to algae: NOEC - Desmodesmus subspicatus (previous name: Scenedesmus subspicatus) - >= 100 mg/L - 96 h.
• Toxicity to microorganisms: EC10 - activated sludge, industrial - > 1 995 mg/L - 30 min. Remarks:Respiration rate.

12.2Persistence and degradability

AEROBIC: Diethylene glycol mono-n-butyl ether had a 5 day BOD and COD of 0.25 and 2.08 g/g, respectively, this calculates to respective theoretical BOD and COD of 11 and 95%(1). Diethylene glycol mono-n-butyl ether showed losses of 2, 13, and 47% of the theoretical BOD when incubated at 20 deg C for 5, 10, and 20 days, respectively(2). Diethylene glycol mono-n-butyl ether degraded 14, 19, 60, and 100% when incubated for 1, 3, 5, and 6 days, respectively, using a non-adapted activated sludge and a modified Zahn-Wellens test(3). Another modified Zahn-Wellens test using non-adapted activated sludge gave 100% degradation after 9 days(3). Diethylene glycol mono-n-butyl ether showed 58 and >60% removal after 28 days using adapted activated sludge(3). In another screening study, diethylene glycol mono-n-butyl ether showed losses of 27, 60, 78, and 81% when incubated at 20 deg C for 5, 10, 15, and 20 days, respectively(4). Using the OECD 301D screening test, diethylene glycol mono-n-butyl ether showed losses of 3, 70, and 88% when incubated at 20 deg C for 5, 15, and 28 days, respectively(4). Using the OECD 301A method diethylene glycol mono-n-butyl ether showed a 94% removal after 14 days(3). Diethylene glycol mono-n-butyl ether had 5, 10, and 15 day BODs of 5.2, 57, and 72% of theoretical BOD(3). Diethylene glycol mono-n-butyl ether, present at 100 mg/L, reached 92% of its theoretical BOD in 4 weeks using an activated sludge inoculum at 30 mg/L in the Japanese MITI test(5). A study using activated sludge gave a degradation rate for diethylene glycol mono-n-butyl ether of 0.37/hour(6) giving a half-life of about 1.9 hours(SRC).

12.3Bioaccumulative potential

An estimated BCF of 3 was calculated in fish for diethylene glycol mono-n-butyl ether(SRC), using a log Kow of 0.56(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is low(SRC).

12.4Mobility in soil

Using a structure estimation method based on molecular connectivity indices(1), the Koc of diethylene glycol mono-n-butyl ether can be estimated to be 10(SRC). According to a classification scheme(2), this estimated Koc value suggests that diethylene glycol mono-n-butyl ether is expected to have very high mobility in soil.

12.5Other adverse effects

no data available

SECTION 13: Disposal considerations

13.1Disposal methods

Product

The material can be disposed of by removal to a licensed chemical destruction plant or by controlled incineration with flue gas scrubbing. Do not contaminate water, foodstuffs, feed or seed by storage or disposal. Do not discharge to sewer systems.

Contaminated packaging

Containers can be triply rinsed (or equivalent) and offered for recycling or reconditioning. Alternatively, the packaging can be punctured to make it unusable for other purposes and then be disposed of in a sanitary landfill. Controlled incineration with flue gas scrubbing is possible for combustible packaging materials.

SECTION 14: Transport information

14.1UN Number

ADR/RID: Not dangerous goods. (For reference only, please check.)

IMDG: Not dangerous goods. (For reference only, please check.)

IATA: Not dangerous goods. (For reference only, please check.)

14.2UN Proper Shipping Name

ADR/RID: Not dangerous goods. (For reference only, please check.)

IMDG: Not dangerous goods. (For reference only, please check.)

IATA: Not dangerous goods. (For reference only, please check.)

14.3Transport hazard class(es)

ADR/RID: Not dangerous goods. (For reference only, please check.)

IMDG: Not dangerous goods. (For reference only, please check.)

IATA: Not dangerous goods. (For reference only, please check.)

14.4Packing group, if applicable

ADR/RID: Not dangerous goods. (For reference only, please check.)

IMDG: Not dangerous goods. (For reference only, please check.)

IATA: Not dangerous goods. (For reference only, please check.)

14.5Environmental hazards

ADR/RID: No

IMDG: No

IATA: No

14.6Special precautions for user

no data available

14.7Transport in bulk according to IMO instruments

no data available

SECTION 15: Regulatory information

15.1Safety, health and environmental regulations specific for the product in question

Chemical name	Common names and synonyms	CAS number	EC number
2-(2-butoxyethoxy)ethanol	2-(2-butoxyethoxy)ethanol	112-34-5	203-961-6
European Inventory of Existing Commercial Chemical Substances (EINECS)			Listed.
EC Inventory			Listed.
United States Toxic Substances Control Act (TSCA) Inventory			Listed.
China Catalog of Hazardous chemicals 2015			Not Listed.
New Zealand Inventory of Chemicals (NZIoC)			Listed.
Philippines Inventory of Chemicals and Chemical Substances (PICCS)			Listed.
Vietnam National Chemical Inventory			Listed.
Chinese Chemical Inventory of Existing Chemical Substances (China IECSC)			Listed.
Korea Existing Chemicals List (KECL)			Listed.

SECTION 16: Other information

Information on revision

Creation Date	July 15, 2019
Revision Date	July 15, 2019

Abbreviations and acronyms

• CAS: Chemical Abstracts Service
• ADR: European Agreement concerning the International Carriage of Dangerous Goods by Road
• RID: Regulation concerning the International Carriage of Dangerous Goods by Rail
• IMDG: International Maritime Dangerous Goods
• IATA: International Air Transportation Association
• TWA: Time Weighted Average
• STEL: Short term exposure limit
• LC50: Lethal Concentration 50%
• LD50: Lethal Dose 50%
• EC50: Effective Concentration 50%

 

Package&Shipping

Qingdao Bravery International Trading Co., LTD. is located in the beautiful tourist city of Qingdao, is a comprehensive chemical enterprise which doing import and export business. Product range including, API, pharmacy intermediates,food additive,Surfactant ,fungicides and other general chemicals. etc.

With the developing world market, we adhere to the principle of "quality, service, integrity and development" ,Forge ahead,and constantly in pursuit of higher level of product quality and service.

We warmly welcome customers home and abroad to build mutual trust, mutual benefit and stable cooperation relation.

 

General items: import and export of goods; Technology import and export; Food additive sales; Feed additive sales; Sales of special chemical products (without hazardous chemicals); Sales of chemical products (excluding licensed chemical products); Livestock and fishery feed sales; Feed raw material sales; Fertilizer sales; Sales of bio-based materials; Health food (pre-packaged) sales; Food sales (pre-packaged food only); Sales of agricultural and sideline products; Pharmaceutical excipients sales; Drug wholesale

 

 

We could give you:

1.Best quality in your requirement

2.Competitive price in China market with standard high quality or customize

3.mature Technical support，Well-trained and professional technologist and sales with rich experience in the field for 5-10 years

4.Professional logistic support，Free sample and correct shipping documents dispatched according to regulations of different countries

All we want is win-win business. Send your inquiries, you will get it!

 

Why choose us:

1.Factory direct sales, so we can provide the competitive price and high quality product base on 5 years of production and R&D experience

2.It is available in stock for quick shipment. Products could be packaged according to customer’s specialized requirements.

3.The products can be transported by Courier, air or sea.

4.Customers will receive the most professional technical support and efficient service.

5.Any inquiries will be replied within 24hours.

6.High purity with test report.