Dipropylene glycol (DPG) CAS NO.25265-71-8

MATERIAL SAFETY SHEET

1. Product Identification

Synonyms: Oxybispropanol

CAS No.: 25265-71-8

Molecular Weight: 134.18

Molecular Formula: C6H14O3

2. Composition/Information on Ingredients

Ingredient CAS No

--------------------------------------- ------------ ------------

3. Hazards Identification

Emergency Overview

--------------------------

CAUTION! MAY CAUSE IRRITATION TO SKIN AND EYES.

SAF-T-DATA(tm) Ratings (Provided here for your convenience)

-----------------------------------------------------------------------------

Health Rating: 2 - Moderate (Life)

Flammability Rating: 1 - Slight

Reactivity Rating: 1 - Slight

Contact Rating: 1 - Slight

Lab Protective Equip: GOGGLES; LAB COAT; VENT HOOD; PROPER GLOVES

Storage Color Code: Green (General Storage)

----------------------------------------------------------------------------

Potential Health Effects

----------------------------------

Inhalation:

No adverse health effects via inhalation.

Ingestion:

Relatively non-toxic. Ingestion of sizable amount (over 100ml) may cause some gastrointestinal upset and

temporary central nervous system depression. Effects appear more severe in individuals with kidney problems.

Skin Contact:

Mild irritant and defatting agent, especially on prolonged contact.

Eye Contact:

May cause transitory stinging and tearing.

Chronic Exposure:

Lactic acidosis, stupor and seizures have been reported following chronic ingestion.

Aggravation of Pre-existing Conditions:

Dipropylene Glycol 25265-71-8

Kidney disorders.

4. First Aid Measures

Eye Contact:

Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for

at least 15 minutes. Cold water may be used. Get medical attention if irritation occurs.  

Skin Contact:

Wash with soap and water. Cover the irritated skin with an emollient. Get medical attention if irritation

develops. Cold water may be used.

Serious Skin Contact: Not available.

Inhalation:

If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.

Get medical attention.

Serious Inhalation: Not available.

Ingestion:

Do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an

unconscious person. Loosen tight clothing such as a collar, tie, belt or waistband. Get medical attention if

symptoms appear.

Serious Ingestion: Not available.

5. Fire Fighting Measures

Flammability of the Product: May be combustible at high temperature.

Auto-Ignition Temperature: 310°C (590°F)

Flash Points: OPEN CUP: 121.11°C (250°F) -137.78 deg. C (280 deg. F).

Flammable Limits: Not available.

Products of Combustion: These products are carbon oxides (CO, CO2).

Fire Hazards in Presence of Various Substances: Slightly flammable to flammable in presence of open flames

and sparks, of heat.

Explosion Hazards in Presence of Various Substances:

Risks of explosion of the product in presence of mechanical impact: Not available.

Risks of explosion of the product in presence of static discharge: Not available.

Fire Fighting Media and Instructions:

SMALL FIRE: Use DRY chemical powder.

LARGE FIRE: Use water spray, fog or foam. Do not use water jet.

Special Remarks on Fire Hazards: Not available.

Special Remarks on Explosion Hazards: Not available.

6. Accidental Release Measures

Small Spill:

Dilute with water and mop up, or absorb with an inert dry material and place in an appropriate waste disposal

container. Finish cleaning by spreading water on the contaminated surface and dispose of according to local

and regional authority requirements.

Large Spill:

Absorb with an inert material and put the spilled material in an appropriate waste disposal. Finish cleaning by

spreading water on the contaminated surface and allow to evacuate through the sanitary system.

7. Handling and Storage

Protect container from physical damage. Store in a cool, dry, ventilated area away from sources of heat,

moisture, and incompatible substances. Containers of this material may be hazardous when empty since they

retain product residues (vapors, liquid); observe all warnings and precautions listed for the product.

8. Exposure Controls/Personal Protection

Precautions:

Keep away from heat. Keep away from sources of ignition. Ground all equipment containing material. Do not

ingest. Do not breathe gas/fumes/ vapor/spray. If ingested, seek medical advice immediately and show the

container or the label. Keep away from incompatibles such as oxidizing agents.

Storage: Keep container tightly closed. Keep container in a cool, well-ventilated area.

Engineering Controls:

Provide exhaust ventilation or other engineering controls to keep the airborne concentrations of vapors below

their respective threshold limit value. Ensure that eyewash stations and safety showers are proximal to the

work-station location.

Personal Protection: Safety glasses. Lab coat.

Personal Protection in Case of a Large Spill:

Splash goggles. Full suit. Boots. Gloves. Suggested protective clothing might not be sufficient; consult a

specialist BEFORE handling this product.

Exposure Limits: Not available.

9. Physical and Chemical Properties

Physical state and appearance: Liquid. (Slightly Viscous liquid.)

Odor: Odorless.

Taste: Not available.

Molecular Weight: 134.18 g/mole

Color: Colorless.

pH (1% soln/water): Not available.

Boiling Point: 231.9°C (449.4°F)

Melting Point: Not available.

Critical Temperature: Not available.

Specific Gravity: 1.0252 (Water = 1)

Vapor Pressure: >0 kPa (@ 20°C)

Vapor Density: 4.63 (Air = 1)

Volatility: Not available.

Odor Threshold: Not available.

Water/Oil Dist. Coeff.: Not available.

Ionicity (in Water): Not available.

Dispersion Properties: See solubility in water, methanol, diethyl ether.

Solubility: Miscible in cold water, hot water, methanol, diethyl ether.

10. Stability and Reactivity

Stability:

Stable under ordinary conditions of use and storage.

Hazardous Decomposition Products:

Carbon dioxide and carbon monoxide may form when heated to decomposition. Aldehydes or lactic, pyruvic

or acetic acids may also be formed.

Hazardous Polymerization:

Will not occur.

Incompatibilities:

Strong oxidizing agents.

Conditions to Avoid:

Heat, flames, ignition sources and incompatibles.

11. Toxicological Information

Oral rat LD50: 20g/kg. Skin rabbit LD50: 20.8g/kg.

Irritation: Eye rabbit/Draize, 500 mg/24H mild.

Investigated as a mutagen and reproductive effector.

--------\Cancer Lists\------------------------------------------------------

---NTP Carcinogen---

Ingredient Known Anticipated IARC Category

------------------------------------ ----- ----------- ----------

Dipropylene Glycol (25265-71-8) No No None

12. Ecological Information

Environmental Fate:

When released into the soil, this material is expected to readily biodegrade. When released into the soil, this

material is expected to leach into groundwater. When released into water, this material is expected to readily

biodegrade. When released into the air, this material is expected to be readily degraded by reaction with

photochemically produced hydroxyl radicals. When released into the air, this material is expected to have a

half-life between 1 and 10 days.

Environmental Toxicity:

No information found.

13. Disposal Considerations

Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste

disposal facility. Processing, use or contamination of this product may change the waste management options.

State and local disposal regulations may differ from federal disposal regulations. Dispose of container and

unused contents in accordance with federal, state and local requirements.

14. Transport Information

Not regulated.

15. Regulatory Information

Chemical Weapons Convention: No TSCA 12(b): No CDTA: No

SARA 311/312: Acute: Yes Chronic: No Fire: No Pressure: No

Reactivity: No (Pure / Liquid)

Poison Schedule: None allocated.

WHMIS:

This MSDS has been prepared according to the hazard criteria of the Controlled Products Regulations (CPR)

and the MSDS contains all of the information required by the CPR.

16. Other Information

Reasons for the confidentiality of the information:

To the best of our knowledge, the information contained here in is accurate. However, neither -----Chemical

Company nor any subsidiaries assume any liability whatsoever for the accuracy or completeness of the

information contained herein. Final determination of suitability of any material is the sole responsibility of the

user. All materials may present unknown hazards and should be used in caution. Although certain hazards are

described herein, we cannot guarantee that these are the only hazards that exist

ITEM	STANDARD
Color                Pt-Co color	20max
Moisture             w/%	0.2max
Specific Gravity       20/20℃	1.0200-1.0250
Acidity               w/%	0.003max
Residue on ignition     %m/m	0.005max
Assay                 w/%	99.5min
Tripropylene glycol  w/%	0.1max
Propylene glycol     w/%	0.2max

 

Package&Shipping

Qingdao Bravery International Trading Co., LTD. is located in the beautiful tourist city of Qingdao, is a comprehensive chemical enterprise which doing import and export business. Product range including, API, pharmacy intermediates,food additive,Surfactant ,fungicides and other general chemicals. etc.

With the developing world market, we adhere to the principle of "quality, service, integrity and development" ,Forge ahead,and constantly in pursuit of higher level of product quality and service.

We warmly welcome customers home and abroad to build mutual trust, mutual benefit and stable cooperation relation.

 

General items: import and export of goods; Technology import and export; Food additive sales; Feed additive sales; Sales of special chemical products (without hazardous chemicals); Sales of chemical products (excluding licensed chemical products); Livestock and fishery feed sales; Feed raw material sales; Fertilizer sales; Sales of bio-based materials; Health food (pre-packaged) sales; Food sales (pre-packaged food only); Sales of agricultural and sideline products; Pharmaceutical excipients sales; Drug wholesale

 

 

We could give you:

1.Best quality in your requirement

2.Competitive price in China market with standard high quality or customize

3.mature Technical support，Well-trained and professional technologist and sales with rich experience in the field for 5-10 years

4.Professional logistic support，Free sample and correct shipping documents dispatched according to regulations of different countries

All we want is win-win business. Send your inquiries, you will get it!

 

Why choose us:

1.Factory direct sales, so we can provide the competitive price and high quality product base on 5 years of production and R&D experience

2.It is available in stock for quick shipment. Products could be packaged according to customer’s specialized requirements.

3.The products can be transported by Courier, air or sea.

4.Customers will receive the most professional technical support and efficient service.

5.Any inquiries will be replied within 24hours.

6.High purity with test report.